Home Products VGX™
The Video GraphicsX – Robust single board computer with comprehensive I/O and graphics

	The VGX is a robust single board computer rich in communications and graphics. The Marvell® RISC-based XScale PXA255 provides the forum for a powerful but low power computer. It includes a Silicon Motion graphics controller for the rich graphics without the heat. The on-board I/O is as comprehensive as you can have on such a small form factor.
	Datasheet | User Manual | Price and Delivery | Contact Us

Processor

• 32-bit Marvell Digital XScale PXA255 RISC processor at 400 MHz

Graphics/Video/Touchscreen

• SM501 graphics accelerator
• Logic-level flat panel interface
• Backlight connector with PWM + ON/OFF controlled by software
• 4 or 5 wire resistive touchscreen interface
• Digital interface for video encoder (Zoom Video Port)

Audio

• AC97, 16-bit stereo Codec
• Stereo microphone input
• 1W stereo speaker outputs
• Headphone output

Memory

• Program/Frame Buffer 103MHz SDRAM up to 256 MB
• Up to 128 MB of synchronous Flash Memory
• One PCMCIA (Type II)
• One Compact Flash signal header
• SD/MMC interface option
• Removable boot ROM (optional)

Operating Environments

• Windows CE
• Linux

Communications/Externals/Interfaces

• One USB 1.1 host port supporting low speed (1.5Mbps) and full speed (12Mbps)
• One USB function port
• Dual CAN 2.0v interfaces (1 channel each, full speed)
• One SPI port (compatible with Motorola, Intel, and National products)
• One serial 8-wire interface with RS-232 (5-wire, 3.3V logic) or RS-485
• One serial 2-wire interface with RS-232 (5-wire, 3.3V logic) or IrDA
• Serial interface with RS-232 or 3.3V logic (9-wire)
• Serial interface with 3.3V logic (9-wire)
• Twenty-two digital I/O ports
• Four analog inputs
• One I2C interface
• 10/100BASE-T Ethernet interfaces (SMSC, RF-45 connector provided)
• Sixteen ADSmartIO™ ports configurable for digital I/O and/or up to 8x8 matrix keypad

Physical/Other

• System dimensions 4 x 6.5 inches
• Power consumption less than 2W
• 5V external power supply required for switching and 5-12V for backlight  

       
Peripherals

• Real Time Clock
• 3 Software controlled LED status indicators
• 4 configuration switches software readable

The above specifications are summary in nature and particular specifications may interact or even exclude each other. Also, the level of function available with any hardware item is dependent on the particular operating system and revision installed. For information on price, specifications or availability, Contact us.