Home Support Contact Sitemap
Overview Products Innovation Applications News Press Room
Products

Home Products AGX - Advanced Graphics Client ™ PXA 255 SBC Logo
AGX - Advanced Graphics Client with PXA CPU
PXA255 Single Board Computer

The AGX is a full-featured single board computer with the latest in embedded technologies. Based on the Marvell® PXA255 processor, AGX provides the basis for a powerful but low-power system. Its onboard I/O is comprehensive and in a small-form factor. The platform has been specially designed for both battery and external power supply types of application scenarios.

Contact Us | User Manual | Price and Delivery
Specifications for AGX

Processor: 

  • 32-bit Marvell XScale PXA255 RISC processor at 400 MH

Graphics/Video/Touchscreen:

  • Backlight connector with PWM + ON/OFF controlled by software
  • 4 or 5-wire resistive touchscreen interface

Audio:

  • Stereo Audio AC97, 16 bit Codec
  • Record from stereo microphones or line input
  • On-board stereo differential audio amplifier for direct connection to speakers

Memory:

  • Program/Frame Buffer 103 MHz SDRAM upto 64 Mbytes    
  • Up to 64 MB of synchronous Flash Memory (32 MB asynchronous)
  • 128 Kbytes of EPROM as a boot device
  • One PCMCIA (Type II)
  • One Compact Flash (Type II) connector

Operating Environments:


Communications/Externals/Interfaces:

  • One 10/100BASE-T Ethernet interface (SMSC, RJ-45 connector)
  • One USB master port with Type A connector
  • One USB slave port with Type B connector
  • One CAN bus interface (1 channel, full speed with Philips SJA 1000)
  • Twenty-two digital I/O
  • Four analog inputs
  • One serial 8-wire interface with RS-232
  • One serial 4-wire interface with RS-232, IrDA
  • One serial 4-wire interface with RS-232
  • Four serial ports with TTL or RS-232
  • Up to 3 additional 10bit analog inputs with ADSmartIO™
  • Up to 8x8 keyboard scan support with ADSmartIO™
  • One PS/2 port (for devices such as Keyboard, Mouse)
       

Physical/Other:

  • System dimensions 4 x 6.5 inches
  • Power requirements less than 500mW
  • Switching power supply requires 5V external power supply and 5-12V for backlight


Peripherals:

  • Real Time Clock
  • 3 Software controlled LED status indicators
  • 4 configuration switches software readable
NOTE:

The above specifications are summary in nature and particular specifications may interact or even exclude each other. Also, the level of function available with any hardware item is dependent on the particular operating system and revision installed. For information on price, specifications or availability, Contact us.

Overview Products Innovation Applications News Press Room