Home Products Bitsy G5 ™
CE 6.0 BSP for CE i.MX31 – A Windows Embedded CE 6.0 BSP for the iMX31 CPU with Standard Products, Custom SBC Designs, or Licensed Production

Now a Windows CE 6.0 BSP is available for the Freescale iMX31 in the popular Bitsy form factor. Based on the CE 6.0 BSP, the Freescale® i.MX31 RISC ARM11 processor, the system offers a wide range of communications features, and power through ADSmartPower™, which optimizes power usage by partitioning the system and deploying components engineered to maximize battery life. The CE 6.0 i.MX31 can be either a stand-alone module or customized for further expandability and customization via the personality board. This system is delivered with full product lifecycle cost management from Applied Data Systems, an expert with Embedded Windows The i.MX31 CE 6.0 BSP is available either as a standard product, an iMX31 custom design or Design License.

Contact Us| User Manual| Price and Delivery

Processor

• 32-bit Freescale i.MX31 RISC processor at 520 MHz
  
• Vector floating point co-processor
  

Graphics/Video/Touchscreen

• 8-bit color XGA (1024x768)
• 16-bit color on VGA (640x480)
• 3.3 or 5V LCD active panel
• Backlight connector with PWM + ON/OFF controlled by software
• 4 or 5 wire resistive touchscreen interface

Audio

• AC97, 16-bit stereo Codec
  
• 1W stereo audio amplifier
  
• Stereo speaker output
  
• Stereo microphone input
  

Memory

• Up to 128 MB of Mobile DDR SDRAM
• Up to 64 MB of NOR Flash
• One PCMCIA (Type II, 3.3V and 5.0V)
• SD/MMC card port, via optional dongle

Operating Environments

• Windows CE
  
• Others (contact factory for all options)

Communications/Externals/Interfaces

• One USB 2.0 Host supporting up to high speed (480Mbps)
• One USB function port
• One serial 8-wire interface with RS-232
• One serial 4-wire interface with RS-232
• One serial 2-wire interface, 3.3V CMOS levels, with RS-232 or IrDA transceiver
• One SPI port
• One I2C port
• ADSmartIO™ (supports 5x4 keypad or 9 GPIO, 5 analog inputs)
• Three external interrupt inputs
• Expansion interface (for personality board expandability)
• 10/100BASE-T Ethernet interfaces (with personality board or through PCMCIA)

Physical/Other

• System dimensions 3 x 5 inches
• Power requirements less than 1W in operation
• On-board power supply (5v or 6-15v input voltage)
• Complete and partitioned on-board power supply
• ADSmartPower™ partitioned power usage

Peripherals

• Real Time Clock
• 3 Software controlled LED status indicators
• 4 configuration switches software readable

The above specifications are summary in nature and particular specifications may interact or even exclude each other. Also, the level of function available with any hardware item is dependent on the particular operating system and revision installed. For information on price, specifications or availability, Contact us.